5.0 on Google 4.9 on Yelp WA Contractor License #ATTICSI795QZ · Licensed, bonded & insured
i
Service: Batt Insulation

Batt Insulation Installation

Batts are pre-cut panels of fiberglass or mineral wool that fit between joists and studs. They're a good choice for open walls, floors over crawl spaces and attics with standard framing, as long as they're fitted carefully.

  • Licensed, Bonded & Insured
  • Family-Owned, 25+ Years
  • Free, No-Obligation Quote

Get Your Free Quote

Tell us about your project and we'll follow up with next steps — usually the same day.

Request Free Inspection
5.0 ★Google Rating4.9 ★Yelp Rating
25+ YrsAttic & Crawl Space Work
LicensedBonded & Insured
Fiberglass batt insulation installed between attic floor joists, providing full, even coverage across the space. i
Overlake, Redmond, WA
Why Attic Star

Why Batts Still Make Sense

They're simple, affordable and easy to inspect later, which is more than you can say for some materials.

  • Good value per square foot
  • Works in walls, floors and attics
  • Easy to check and repair later
  • Available in fiberglass or mineral wool
Get a Free Inspection
Insulation

Everything You Need to Know About Batt Insulation

A batt only performs to its rating if it fills the cavity completely. Compress it behind a wire, leave a gap at the end of a joist bay, or let it sag away from a floor, and you lose a surprising share of its value. Most of the batt insulation we pull out of older homes failed because of the install, not the material.

We cut batts around wiring, pipes and blocking instead of stuffing them over the top, and we split them around wires so the insulation sits on both sides. In crawl spaces we hold floor batts tight to the subfloor with supports so they stay up through years of damp winters.

Batts are a natural fit for remodels with open walls, for crawl space floors, and for attics where the joists are standard spacing and easy to reach. In attics with a lot of obstacles, blown-in usually does a better job, and we'll say so if that's the case in your house.

See the Difference

Batt Insulation: Before and After

Drag the slider to compare the same space before and after the work.

Finished insulation installed evenly throughout the attic floor, improving energy efficiency and comfort in the space.
The attic before work begins, showing the old, uneven batt insulation patched only in some joist bays amid dust and rodent droppings scattered on the floor.
BeforeAfter i
Batt insulation in Kent · East Hill, Kent, WA
The project concludes with the attic fully insulated, ensuring better energy efficiency and comfort with a clean, professional finish.
Before starting, the attic's deteriorated fiberglass batt insulation is visibly sagging and insufficiently covering the wood framing, reducing the home's energy efficiency.
BeforeAfter i
Batt insulation in Lake Stevens · Frontier Village, Lake Stevens, WA
Good to Know

Fiberglass or Mineral Wool?

Fiberglass batts are the familiar pink or yellow kind. They're light, inexpensive and perform well when fitted properly.

Mineral wool batts are denser, hold their shape better, shrug off moisture and resist fire. They cost more, but they're a good pick for walls next to garages, around a furnace, or anywhere you'd like a little more sound control between rooms.

Project Examples

Recent Batt Insulation Jobs

See Full Gallery
Our Process

How We Handle Batt Insulation

1

Free Inspection

We measure what's in your attic or crawl space now, look for moisture and pest damage, and quote the job in writing.

2

Prep and Removal

We protect the path through your house, then bag and haul out old or contaminated insulation.

3

Seal and Install

Gaps around pipes, wires and fixtures get sealed first, then the new insulation goes in to the depth we quoted.

4

Walkthrough

We show you the finished space, with photos if you'd rather not climb up, and leave the access clean.

Related Services

Often Done Together

Most projects involve more than one kind of work. These are the services homeowners most often pair with this one:

We work across Seattle and the Puget Sound, including Seattle, Tacoma, Bellevue, Kent, Everett, Renton, Federal Way, Kirkland. See the full service area.

Rated 5.0 on Google · 4.9 on Yelp

What Puget Sound Homeowners Are Saying

★★★★★

“We had to replace our insulation quickly after a mold remediation, and Tom was wonderful in helping us coordinate both services smoothly. His organized and reassuring manner truly eased the stress for our family and made the whole…”

Jennifer O. · Google Review
★★★★★

“Attic Star did a great job replacing my attic insulation and remediating rodent damage. They were clear about the cost and what I would receive. It was a large job and I doubted they could finish it in one day, but they brought a crew…”

EnDubya H. · Google Review
★★★★★

“Joey was awesome, came out to give us a bid and was super friendly he let us know what we actually needed or didn't. Got a bid that same night and walked us through everything and was very responsive. They sent out Antonio and his…”

Ryan G. · Google Review
★★★★★

“Strong mildew smell near the laundry area ended up leading to mold remediation in the crawl space below. Moisture control adjustments were added after cleanup to stop the issue from returning. Really appreciated how straightforward the…”

Lisa S. · Google Review
★★★★★

“We hired Attic Star for a full Air Duct Replacement and comprehensive Rodent Proofing, and we are incredibly satisfied with the results. Daniel and Nir both played key roles in ensuring this complex project was a success.”

Michell J. · Google Review
★★★★★

“I contacted this company and had a great experience with them, they cleaned my attic in a very efficient way and also applied effective solutions against rodents. The team worked efficiently and showed how good they are at their job,…”

Ninia Q. · Google Review

Free Inspection, Written Quote

Every batt insulation job starts with a free look at the space and a written quote, so you know exactly what you're paying for before we start.

Common Questions

FAQ

Are batts or blown-in better for my attic? +

On an open attic floor with lots of wires and obstacles, blown-in usually fills better. Where the framing is regular and easy to reach, batts work well. We'll recommend one after looking.

Can you insulate my crawl space floor with batts? +

Yes, it's one of the most common uses. We install them tight against the subfloor and add supports so they don't sag over time.

Do batts need a vapor retarder? +

In Washington, the warm side of walls generally needs one, and faced batts or a separate layer handle that. We follow code for the location we're insulating.

Are you licensed and insured? +

Yes. Attic Star is licensed, bonded and insured in Washington (contractor license ATTICSI795QZ), and our own crews do the work. We don't use subcontractors.

How much will it cost? +

It depends on the size of the space and the work involved. The inspection is free, and you get a written quote before anything starts.

Free Inspection

Get Your Free Batt Insulation Estimate

Fill out the form and we'll follow up to schedule your free, no-obligation inspection — most homeowners hear back the same day. Prefer to talk now? Call us directly.

Call now (800) 373-0525

Get Your Free Estimate

Takes less than a minute — tell us about your project and we'll follow up the same day.

Get my Free Estimate
Call Now Free Inspection