5.0 on Google 4.9 on Yelp WA Contractor License #ATTICSI795QZ · Licensed, bonded & insured
i
Service: Fiberglass Roll Insulation

Fiberglass Roll Insulation

Rolls are long continuous blankets of fiberglass. On open attic floors and long crawl space runs they go down fast with fewer seams than batts, which means fewer places for heat to slip through.

  • Licensed, Bonded & Insured
  • Family-Owned, 25+ Years
  • Free, No-Obligation Quote

Get Your Free Quote

Tell us about your project and we'll follow up with next steps — usually the same day.

Request Free Inspection
5.0 ★Google Rating4.9 ★Yelp Rating
25+ YrsAttic & Crawl Space Work
LicensedBonded & Insured
Positioning a large fiberglass insulation roll between attic ceiling joists alongside previously installed batts for full coverage. i
Northeast Tacoma, Tacoma, WA
Why Attic Star

Where Rolls Work Best

Long, open runs between evenly spaced joists.

  • Fewer seams than cut batts
  • Fast to install on open floors
  • Affordable per square foot
  • Easy to check and replace later
Get a Free Inspection
Insulation

Everything You Need to Know About Fiberglass Roll Insulation

Rolls are the same material as fiberglass batts, just left in one long piece. Laying a single run from one end of a joist bay to the other cuts down on the joints where batts butt together, and those joints are where gaps usually show up.

We use rolls most on attic floors with regular framing and on crawl space floors where we can work in long runs. A common approach in attics is a first layer between the joists and a second layer across them, which covers the tops of the joists too.

Like any fiberglass, rolls need to be fitted, not stuffed. We cut around wiring and blocking and keep the insulation full height.

See the Difference

Fiberglass Roll Insulation: Before and After

Drag the slider to compare the same space before and after the work.

Finished: the attic insulation installation is complete, providing a clean, even, and efficient thermal barrier.
Before work begins, the attic’s fiberglass insulation is thin, dirty, and patchy, requiring replacement to improve performance.
BeforeAfter i
Fiberglass roll insulation in Redmond · Education Hill, Redmond, WA
The attic transformation is complete, with new fiberglass roll insulation professionally installed to maximize energy efficiency and comfort.
This attic space in Modesto shows uneven, old fiberglass insulation with many gaps and dust buildup before Attic Star’s professional installation begins.
BeforeAfter i
Fiberglass roll insulation in Bellevue · Crossroads, Bellevue, WA
Good to Know

Getting the Most From a Roll

Running a second layer perpendicular to the first is the single biggest improvement you can make with rolled insulation. The joists themselves conduct heat, and covering them closes that path.

Faced rolls, with a paper backing, act as a vapor retarder and go with the paper toward the heated side of the house. Unfaced rolls are used when adding a layer over existing insulation.

Project Examples

Recent Fiberglass Roll Insulation Jobs

See Full Gallery
Our Process

How We Handle Fiberglass Roll Insulation

1

Free Inspection

We measure what's in your attic or crawl space now, look for moisture and pest damage, and quote the job in writing.

2

Prep and Removal

We protect the path through your house, then bag and haul out old or contaminated insulation.

3

Seal and Install

Gaps around pipes, wires and fixtures get sealed first, then the new insulation goes in to the depth we quoted.

4

Walkthrough

We show you the finished space, with photos if you'd rather not climb up, and leave the access clean.

Related Services

Often Done Together

Most projects involve more than one kind of work. These are the services homeowners most often pair with this one:

We work across Seattle and the Puget Sound, including Seattle, Tacoma, Bellevue, Kent, Everett, Renton, Federal Way, Kirkland. See the full service area.

Rated 5.0 on Google · 4.9 on Yelp

What Puget Sound Homeowners Are Saying

★★★★★

“We had to replace our insulation quickly after a mold remediation, and Tom was wonderful in helping us coordinate both services smoothly. His organized and reassuring manner truly eased the stress for our family and made the whole…”

Jennifer O. · Google Review
★★★★★

“Attic Star did a great job replacing my attic insulation and remediating rodent damage. They were clear about the cost and what I would receive. It was a large job and I doubted they could finish it in one day, but they brought a crew…”

EnDubya H. · Google Review
★★★★★

“I contacted this company and had a great experience with them, they cleaned my attic in a very efficient way and also applied effective solutions against rodents. The team worked efficiently and showed how good they are at their job,…”

Ninia Q. · Google Review
★★★★★

“Joey was awesome, came out to give us a bid and was super friendly he let us know what we actually needed or didn't. Got a bid that same night and walked us through everything and was very responsive. They sent out Antonio and his…”

Ryan G. · Google Review
★★★★★

“Strong mildew smell near the laundry area ended up leading to mold remediation in the crawl space below. Moisture control adjustments were added after cleanup to stop the issue from returning. Really appreciated how straightforward the…”

Lisa S. · Google Review
★★★★★

“We hired Attic Star for a full Air Duct Replacement and comprehensive Rodent Proofing, and we are incredibly satisfied with the results. Daniel and Nir both played key roles in ensuring this complex project was a success.”

Michell J. · Google Review

Free Inspection, Written Quote

Every fiberglass roll insulation job starts with a free look at the space and a written quote, so you know exactly what you're paying for before we start.

Common Questions

FAQ

What's the difference between rolls and batts? +

The material is the same. Rolls come in long continuous lengths, batts come pre-cut. Rolls leave fewer seams on long runs.

Can you add rolls over my existing insulation? +

Yes, if the existing insulation is dry and clean. We'd use unfaced rolls laid across the joists.

How long does fiberglass last? +

Fiberglass doesn't break down. It's damaged by moisture, compression and pests, which is what we look for during an inspection.

Are you licensed and insured? +

Yes. Attic Star is licensed, bonded and insured in Washington (contractor license ATTICSI795QZ), and our own crews do the work. We don't use subcontractors.

How much will it cost? +

It depends on the size of the space and the work involved. The inspection is free, and you get a written quote before anything starts.

Free Inspection

Get Your Free Fiberglass Roll Insulation Estimate

Fill out the form and we'll follow up to schedule your free, no-obligation inspection — most homeowners hear back the same day. Prefer to talk now? Call us directly.

Call now (800) 373-0525

Get Your Free Estimate

Takes less than a minute — tell us about your project and we'll follow up the same day.

Get my Free Estimate
Call Now Free Inspection