5.0 on Google 4.9 on Yelp WA Contractor License #ATTICSI795QZ · Licensed, bonded & insured
i
Service: Insulation Services

Insulation Contractors for Seattle and Puget Sound Homes

Old attic insulation in a lot of Seattle-area houses is thin, flattened or full of rodent droppings. We take out what isn't working, seal the gaps under it, and put in insulation sized for our climate.

  • Licensed, Bonded & Insured
  • Family-Owned, 25+ Years
  • Free, No-Obligation Quote

Get Your Free Quote

Tell us about your project and we'll follow up with next steps — usually the same day.

Request Free Inspection
5.0 ★Google Rating4.9 ★Yelp Rating
25+ YrsAttic & Crawl Space Work
LicensedBonded & Insured
The Problem

Signs Your Insulation Isn't Doing Its Job

Most people don't look in the attic until something's wrong. These are the usual clues.

  • Upstairs rooms that won't warm up in January
  • Heating bills creeping up every winter
  • Insulation you can see the joists through
  • Droppings, tunnels or a musty smell up top
Get a Free Inspection
This attic shows worn, rodent-contaminated insulation that needs removal and replacement to improve air quality and energy efficiency. i
Oakbrook, Lakewood, WA
Why Attic Star

What You Get With Attic Star

One crew handles the whole job, from tearing out the old material to the last batt.

  • A written quote after a free inspection
  • Air sealing before any new insulation goes in
  • Our own crews, never subcontractors
  • Old material bagged and hauled away the same day
Get a Free Inspection
An attic floor cleared of old insulation, with debris bagged for haul-away and the joist bays exposed and ready for new insulation. i
Casino Road, Everett, WA
Insulation

Everything You Need to Know About Insulation Services

Insulation stops working long before it disappears. Blown-in fiberglass settles, batts sag off the joists, and once rats or mice have moved through an attic the insulation is packed down, soiled and holding odor. A house can have what looks like plenty of material and still be losing heat through it.

Our crews start by measuring what's actually there and checking why it failed. If rodents got in, we close the entry points before anything new goes down. If there are gaps around light fixtures, plumbing stacks and the top plates of walls, we seal them, because warm air leaking through those holes carries moisture into the attic as well as heat.

Then we put in the right material for the space. Blown-in works well on open attic floors and over awkward framing. Batts and rolls suit floors over crawl spaces and open walls. Rockwool makes sense near heat sources or where sound matters. We explain the options and price them in writing before we start.

Most single-family attics are done in a day. You don't need to clear out the house, just give us a path to the attic hatch, and we cover floors on the way in and out.

See the Difference

Insulation Services: Before and After

Drag the slider to compare the same space before and after the work.

The attic now has clean, new insulation installed perfectly, free from contamination and damage, ensuring comfort and energy savings.
This attic shows worn, rodent-contaminated insulation that needs removal and replacement to improve air quality and energy efficiency.
BeforeAfter i
Attic insulation replacement in Lakewood · Oakbrook, Lakewood, WA
Finished stage shows clean, new insulation completely and evenly installed, restoring the attic’s thermal barrier without changing the structure or fixtures.
Before starting, the attic shows water-damaged old fiberglass insulation sagging and stained, clearly needing replacement for improved home comfort.
BeforeAfter i
Attic insulation replacement in Renton · Kennydale, Renton, WA
Good to Know

Insulation in a Wet, Mild Climate

Puget Sound winters aren't extreme, but they're long and damp. The heating season here runs from October into May, so a poorly insulated attic costs you a little every day for most of the year rather than a lot for a few weeks.

Moisture matters as much as R-value. Warm, humid air from bathrooms and kitchens rises into the attic through unsealed gaps, hits the cold roof deck and condenses. That's why we air seal before insulating, and why we check that bath fans actually vent outside instead of into the attic.

For reference, Washington's energy code calls for around R-49 in attics and R-30 under floors in new homes. Many older houses in the region have a fraction of that. You don't have to hit new-construction numbers, but closing the gap usually makes a difference you can feel.

Project Examples

Recent Insulation Services Jobs

See Full Gallery
Our Process

How We Handle Insulation Services

1

Free Inspection

We measure what's in your attic or crawl space now, look for moisture and pest damage, and quote the job in writing.

2

Prep and Removal

We protect the path through your house, then bag and haul out old or contaminated insulation.

3

Seal and Install

Gaps around pipes, wires and fixtures get sealed first, then the new insulation goes in to the depth we quoted.

4

Walkthrough

We show you the finished space, with photos if you'd rather not climb up, and leave the access clean.

Related Services

Often Done Together

Most projects involve more than one kind of work. These are the services homeowners most often pair with this one:

We work across Seattle and the Puget Sound, including Seattle, Tacoma, Bellevue, Kent, Everett, Renton, Federal Way, Kirkland. See the full service area.

Rated 5.0 on Google · 4.9 on Yelp

What Puget Sound Homeowners Are Saying

★★★★★

“Attic Star did a great job replacing my attic insulation and remediating rodent damage. They were clear about the cost and what I would receive. It was a large job and I doubted they could finish it in one day, but they brought a crew…”

EnDubya H. · Google Review
★★★★★

“We had to replace our insulation quickly after a mold remediation, and Tom was wonderful in helping us coordinate both services smoothly. His organized and reassuring manner truly eased the stress for our family and made the whole…”

Jennifer O. · Google Review
★★★★★

“Joey was awesome, came out to give us a bid and was super friendly he let us know what we actually needed or didn't. Got a bid that same night and walked us through everything and was very responsive. They sent out Antonio and his…”

Ryan G. · Google Review
★★★★★

“Strong mildew smell near the laundry area ended up leading to mold remediation in the crawl space below. Moisture control adjustments were added after cleanup to stop the issue from returning. Really appreciated how straightforward the…”

Lisa S. · Google Review
★★★★★

“We hired Attic Star for a full Air Duct Replacement and comprehensive Rodent Proofing, and we are incredibly satisfied with the results. Daniel and Nir both played key roles in ensuring this complex project was a success.”

Michell J. · Google Review
★★★★★

“I contacted this company and had a great experience with them, they cleaned my attic in a very efficient way and also applied effective solutions against rodents. The team worked efficiently and showed how good they are at their job,…”

Ninia Q. · Google Review

Free Inspection, Written Quote

Every insulation services job starts with a free look at the space and a written quote, so you know exactly what you're paying for before we start.

Common Questions

FAQ

How much insulation should my attic have? +

For new homes, Washington's energy code calls for about R-49 in the attic, which is roughly 14 to 16 inches of blown-in fiberglass. Older homes often have R-11 to R-19. We'll measure yours and tell you where it stands.

Do you remove the old insulation or just add more? +

It depends on its condition. Clean, dry insulation can stay and be topped up. Insulation that's soiled by rodents, wet, or moldy should come out, and we'll show you which one you've got.

Can you help with PSE rebates? +

Yes. Qualifying PSE customers may get rebates on attic, floor and wall insulation and air sealing. We can look at what might qualify during the inspection. See our PSE rebates page for details.

Are you licensed and insured? +

Yes. Attic Star is licensed, bonded and insured in Washington (contractor license ATTICSI795QZ), and our own crews do the work. We don't use subcontractors.

How much will it cost? +

It depends on the size of the space and the work involved. The inspection is free, and you get a written quote before anything starts.

Free Inspection

Get Your Free Insulation Services Estimate

Fill out the form and we'll follow up to schedule your free, no-obligation inspection — most homeowners hear back the same day. Prefer to talk now? Call us directly.

Call now (800) 373-0525

Get Your Free Estimate

Takes less than a minute — tell us about your project and we'll follow up the same day.

Get my Free Estimate
Call Now Free Inspection