5.0 on Google 4.9 on Yelp WA Contractor License #ATTICSI795QZ · Licensed, bonded & insured
i
Service: Blown-In Insulation

Blown-In Insulation

Loose-fill insulation is blown through a hose and settles into every corner of an attic floor, around wires, ducts and odd framing that batts can't follow. It's the fastest way to bring an under-insulated attic up to a useful depth.

  • Licensed, Bonded & Insured
  • Family-Owned, 25+ Years
  • Free, No-Obligation Quote

Get Your Free Quote

Tell us about your project and we'll follow up with next steps — usually the same day.

Request Free Inspection
5.0 ★Google Rating4.9 ★Yelp Rating
25+ YrsAttic & Crawl Space Work
LicensedBonded & Insured
Loose-fill insulation being blown from a hose into an attic corner near ductwork, filling gaps around the framing. i
Getchell, Marysville, WA
Why Attic Star

Why Homeowners Choose Blown-In

It fills the spaces that make batts hard to fit.

  • Covers around wires, ducts and blocking
  • No gaps at the edges of joist bays
  • Quick install, usually in a day
  • Can go over clean existing insulation
Get a Free Inspection
Insulation

Everything You Need to Know About Blown-In Insulation

Blown-in insulation is fiberglass or cellulose broken into small pieces and blown from a machine in our truck through a long hose into the attic. The material drifts into place and forms a continuous blanket, which is why it handles obstructions so much better than batts.

The part people don't see is the prep. Before we blow anything, we seal the gaps around light fixtures, wiring holes and plumbing stacks, put baffles at the eaves so the insulation doesn't block roof vents, and build a dam around the attic hatch so the insulation stays put when you open it.

We mark the depth with rulers stapled to the framing so you can see that the attic got what we quoted. Most attics take a few hours once the prep is done.

See the Difference

Blown-In Insulation: Before and After

Drag the slider to compare the same space before and after the work.

The attic floor is now completely insulated with blown-in cellulose, providing seamless, gap-free thermal protection.
Before work begins, the attic shows old fiberglass batt insulation in poor condition confined to the rear corner, leaving most of the floor uncovered and exposing framing gaps.
BeforeAfter i
Blown-in insulation in Everett · Silver Lake, Everett, WA
Finished installation shows the attic floor uniformly insulated with freshly applied blown-in cellulose, providing effective thermal coverage.
Before work begins, the attic’s old fiberglass batt insulation appears thin and patchy with numerous gaps, failing to provide effective coverage.
BeforeAfter i
Blown-in insulation in Maple Valley · Lake Wilderness, Maple Valley, WA
Good to Know

Fiberglass or Cellulose?

Both are blown the same way. Fiberglass is light, doesn't absorb water and doesn't settle much. Cellulose is made from recycled paper treated for fire and pests, is a bit denser, and does a good job slowing air movement.

In our damp climate, either works if the attic is ventilated and the ceiling below is sealed. We'll talk through the trade-offs and price both if you're unsure.

Project Examples

Recent Blown-In Insulation Jobs

See Full Gallery
Our Process

How We Handle Blown-In Insulation

1

Free Inspection

We measure what's in your attic or crawl space now, look for moisture and pest damage, and quote the job in writing.

2

Prep and Removal

We protect the path through your house, then bag and haul out old or contaminated insulation.

3

Seal and Install

Gaps around pipes, wires and fixtures get sealed first, then the new insulation goes in to the depth we quoted.

4

Walkthrough

We show you the finished space, with photos if you'd rather not climb up, and leave the access clean.

Related Services

Often Done Together

Most projects involve more than one kind of work. These are the services homeowners most often pair with this one:

We work across Seattle and the Puget Sound, including Seattle, Tacoma, Bellevue, Kent, Everett, Renton, Federal Way, Kirkland. See the full service area.

Rated 5.0 on Google · 4.9 on Yelp

What Puget Sound Homeowners Are Saying

★★★★★

“We had to replace our insulation quickly after a mold remediation, and Tom was wonderful in helping us coordinate both services smoothly. His organized and reassuring manner truly eased the stress for our family and made the whole…”

Jennifer O. · Google Review
★★★★★

“Attic Star did a great job replacing my attic insulation and remediating rodent damage. They were clear about the cost and what I would receive. It was a large job and I doubted they could finish it in one day, but they brought a crew…”

EnDubya H. · Google Review
★★★★★

“Strong mildew smell near the laundry area ended up leading to mold remediation in the crawl space below. Moisture control adjustments were added after cleanup to stop the issue from returning. Really appreciated how straightforward the…”

Lisa S. · Google Review
★★★★★

“We hired Attic Star for a full Air Duct Replacement and comprehensive Rodent Proofing, and we are incredibly satisfied with the results. Daniel and Nir both played key roles in ensuring this complex project was a success.”

Michell J. · Google Review
★★★★★

“I contacted this company and had a great experience with them, they cleaned my attic in a very efficient way and also applied effective solutions against rodents. The team worked efficiently and showed how good they are at their job,…”

Ninia Q. · Google Review
★★★★★

“Joey was awesome, came out to give us a bid and was super friendly he let us know what we actually needed or didn't. Got a bid that same night and walked us through everything and was very responsive. They sent out Antonio and his…”

Ryan G. · Google Review

Free Inspection, Written Quote

Every blown-in insulation job starts with a free look at the space and a written quote, so you know exactly what you're paying for before we start.

Common Questions

FAQ

How deep should blown-in insulation be? +

To reach about R-49, the level Washington's energy code sets for new homes, blown fiberglass is typically 14 to 16 inches deep. We'll tell you what depth we're installing and mark it in the attic.

Can you blow new insulation over the old? +

If the old insulation is dry and clean, yes. If it's soiled by rodents or has been wet, it should come out first.

Will blown-in insulation block my attic vents? +

Not if it's installed properly. We put baffles at the eaves so air can still flow from the soffit vents.

Are you licensed and insured? +

Yes. Attic Star is licensed, bonded and insured in Washington (contractor license ATTICSI795QZ), and our own crews do the work. We don't use subcontractors.

How much will it cost? +

It depends on the size of the space and the work involved. The inspection is free, and you get a written quote before anything starts.

Free Inspection

Get Your Free Blown-In Insulation Estimate

Fill out the form and we'll follow up to schedule your free, no-obligation inspection — most homeowners hear back the same day. Prefer to talk now? Call us directly.

Call now (800) 373-0525

Get Your Free Estimate

Takes less than a minute — tell us about your project and we'll follow up the same day.

Get my Free Estimate
Call Now Free Inspection