5.0 on Google 4.9 on Yelp WA Contractor License #ATTICSI795QZ · Licensed, bonded & insured
i
Service: Vapor & Moisture Barriers

Vapor and Moisture Barriers for Crawl Spaces

The ground under your house gives off moisture all year, and in our climate that's a lot of water. A proper ground cover stops most of it before it reaches your floor framing, insulation and the air inside your home.

  • Licensed, Bonded & Insured
  • Family-Owned, 25+ Years
  • Free, No-Obligation Quote

Get Your Free Quote

Tell us about your project and we'll follow up with next steps — usually the same day.

Request Free Inspection
5.0 ★Google Rating4.9 ★Yelp Rating
25+ YrsAttic & Crawl Space Work
LicensedBonded & Insured
The Problem

Signs of a Moisture Problem

Look for these under the house or in the rooms above.

  • Musty smell in the house, worse in damp weather
  • Condensation or mold on floor joists
  • Sagging, wet insulation
  • Missing, torn or bunched-up plastic on the ground
Get a Free Inspection
Before installation, the crawl space floor is bare and damp, showing soil and debris accumulation typical of moisture problems in untreated homes. i
South Hill, Puyallup, WA
Why Attic Star

What a Good Barrier Does

It's one of the least expensive ways to protect a house.

  • Cuts moisture rising from the soil
  • Protects floor framing from rot
  • Keeps insulation dry
  • Makes the crawl space cleaner to work in
Get a Free Inspection
A crawl space fully lined with a vapor moisture barrier, with support piers wrapped in sealed sheeting to block ground moisture. i
Fern Hill, Tacoma, WA
Attic, Crawl Space & Mold

Everything You Need to Know About Vapor & Moisture Barriers

A vapor barrier is a heavy sheet of polyethylene laid over the soil in a crawl space. Washington's building code calls for a 6-mil black polyethylene ground cover in vented crawl spaces, but many we see have thin, torn plastic or nothing at all.

We start by clearing debris and smoothing the ground so nothing punctures the new liner. Then we lay the barrier with seams overlapped and taped, run it up the foundation walls where needed, and fit it tightly around piers. Heavier, reinforced liners are available if you'll be storing things or crawling around down there often.

If there's standing water, we'll talk about drainage first. A barrier controls vapor; it isn't designed to hold back a flood.

See the Difference

Vapor & Moisture Barriers: Before and After

Drag the slider to compare the same space before and after the work.

Installation complete: the crawl space is protected by a professionally fitted vapor moisture barrier, preventing further moisture problems.
Before installation, the crawl space floor is bare and damp, showing soil and debris accumulation typical of moisture problems in untreated homes.
BeforeAfter i
Crawl space vapor barrier in Puyallup · South Hill, Puyallup, WA
Finished installation: the vapor moisture barrier completely covers the crawl space floor, eradicating dampness and protecting the structure while maintaining proper ventilation.
Before the installation, the crawl space floor is damp and uneven with visible mold on joists and scattered waste, typical indications of moisture problems in this San Mateo home.
BeforeAfter i
Crawl space vapor barrier in Lakewood · Interlaaken, Lakewood, WA
Good to Know

Why Dirt Crawl Spaces Are So Damp Here

Western Washington gets steady rain from fall through spring and the soil under houses rarely dries out. Even without puddles, the ground releases water vapor into the crawl space constantly.

Vents help, but in summer they can bring in warm, humid air that condenses on cooler surfaces under the house. A good ground cover deals with the biggest source of moisture regardless of season.

Project Examples

Recent Vapor & Moisture Barriers Jobs

See Full Gallery
Our Process

How We Handle Vapor & Moisture Barriers

1

Inspection

We check moisture, the ground cover, insulation, ducts and any signs of rodents under the house.

2

Clean Out

Debris, old plastic, fallen insulation and pest waste are bagged and removed.

3

Repair and Protect

We install the ground cover, insulation or sealing the job calls for and close up entry points.

4

Final Check

You get photos of the finished crawl space and a plain explanation of what was done.

Related Services

Often Done Together

Most projects involve more than one kind of work. These are the services homeowners most often pair with this one:

We work across Seattle and the Puget Sound, including Seattle, Tacoma, Bellevue, Kent, Everett, Renton, Federal Way, Kirkland. See the full service area.

Rated 5.0 on Google · 4.9 on Yelp

What Puget Sound Homeowners Are Saying

★★★★★

“Strong mildew smell near the laundry area ended up leading to mold remediation in the crawl space below. Moisture control adjustments were added after cleanup to stop the issue from returning. Really appreciated how straightforward the…”

Lisa S. · Google Review
★★★★★

“We had to replace our insulation quickly after a mold remediation, and Tom was wonderful in helping us coordinate both services smoothly. His organized and reassuring manner truly eased the stress for our family and made the whole…”

Jennifer O. · Google Review
★★★★★

“We hired Attic Star for a full Air Duct Replacement and comprehensive Rodent Proofing, and we are incredibly satisfied with the results. Daniel and Nir both played key roles in ensuring this complex project was a success.”

Michell J. · Google Review
★★★★★

“I contacted this company and had a great experience with them, they cleaned my attic in a very efficient way and also applied effective solutions against rodents. The team worked efficiently and showed how good they are at their job,…”

Ninia Q. · Google Review
★★★★★

“Attic Star did a great job replacing my attic insulation and remediating rodent damage. They were clear about the cost and what I would receive. It was a large job and I doubted they could finish it in one day, but they brought a crew…”

EnDubya H. · Google Review
★★★★★

“Joey was awesome, came out to give us a bid and was super friendly he let us know what we actually needed or didn't. Got a bid that same night and walked us through everything and was very responsive. They sent out Antonio and his…”

Ryan G. · Google Review

Free Inspection, Written Quote

Every vapor & moisture barriers job starts with a free look at the space and a written quote, so you know exactly what you're paying for before we start.

Common Questions

FAQ

How thick should a crawl space vapor barrier be? +

Code calls for at least 6-mil polyethylene. We often recommend thicker, reinforced material for durability.

What's the difference between a barrier and encapsulation? +

A barrier covers the ground. Encapsulation also seals the walls and vents, turning the crawl space into a closed, conditioned space.

Will a vapor barrier stop mold? +

It removes the main source of moisture, which is what mold needs. Existing mold should be treated separately.

Are you licensed and insured? +

Yes. Attic Star is licensed, bonded and insured in Washington (contractor license ATTICSI795QZ), and our own crews do the work. We don't use subcontractors.

How much will it cost? +

It depends on the size of the space and the work involved. The inspection is free, and you get a written quote before anything starts.

Free Inspection

Get Your Free Vapor & Moisture Barriers Estimate

Fill out the form and we'll follow up to schedule your free, no-obligation inspection — most homeowners hear back the same day. Prefer to talk now? Call us directly.

Call now (800) 373-0525

Get Your Free Estimate

Takes less than a minute — tell us about your project and we'll follow up the same day.

Get my Free Estimate
Call Now Free Inspection