"How much insulation do I need?" is one of the first questions we get, and the honest answer is: probably more than you have, but not necessarily as much as a new house.
R-value, quickly
Insulation is rated by R-value, a measure of how well it slows heat. Higher is better. Different materials give different R-values per inch, so the depth you need depends on what you're using.
- Blown-in fiberglass: roughly R-2.5 per inch
- Fiberglass batts: roughly R-3 to R-3.5 per inch
- Blown-in cellulose: roughly R-3.5 per inch
- Rockwool batts: roughly R-4 per inch
Those are approximate, and they assume the insulation is fluffy and dry. Compressed, wet, or rodent-damaged insulation performs well below its label.
What the code says
For new homes, Washington's energy code calls for around R-49 in the attic. With blown fiberglass that's 14 to 16 inches or so. Floors over crawl spaces are around R-30.
Older homes aren't required to meet that, and many don't come close. It's common for us to measure R-11 to R-19 in a 1960s or 1970s attic, and less in older houses.
Measuring your own
Take a ruler or tape measure up with you. Measure the depth in a few spots away from the hatch, since the area right by the opening is usually disturbed. Multiply the average depth by the rough R-value per inch for the type you see.
Pink or yellow fluffy material is fiberglass. Gray, paper-like flakes are cellulose. Greenish or brown dense fibers might be rockwool. If you see gray-brown pebbly material, it could be vermiculite, which can contain asbestos. Don't disturb it; call a professional to test it.
Do you need to hit R-49?
Not necessarily. Going from R-11 to R-38 makes a much bigger difference than going from R-38 to R-49. We'll tell you what makes sense for your house and budget, and whether the existing insulation can stay or needs to come out first.
Learn more about blown-in insulation, or batts if your attic has easy, open framing.