Here's something most people don't know about insulation: it's a filter, not a wall. Fiberglass and cellulose slow heat moving through them, but air can still flow through them. If warm air is leaking up into your attic through gaps in the ceiling, it's carrying heat right past the insulation.
Where the leaks are
Your ceiling has more holes in it than you'd think. Every light fixture, every bathroom fan, the plumbing stack, the chimney, wiring runs through the top plates of walls, and the attic hatch itself. In older homes, there are also gaps where walls meet the ceiling and where dropped soffits over kitchen cabinets open into the attic.
Individually they're small. Added together, it's like leaving a window open all winter.
Why it matters more here
In our climate, the bigger problem isn't the heat, it's the moisture that comes with it. Warm indoor air holds water vapor from showers, cooking, breathing and laundry. When it leaks into a cold attic, it hits the underside of the roof and condenses. Over a long wet winter, that's enough to grow mold on the roof sheathing and rust nails.
We see it constantly: dark staining on attic plywood above bathrooms, frost on nail tips on cold mornings, damp insulation in a corner. Most of it traces back to air leaks and fans venting into the attic.
How we seal
- Foam or caulk around wires and pipes through the top plates
- Rigid board and foam over open soffits and chases
- Sealed boxes or covers over older recessed lights
- Weatherstripping and an insulated cover on the attic hatch
- Bath fans ducted all the way outside
The best time to do this is when the attic floor is bare, during an insulation replacement or attic cleanup. Once new insulation is down, the gaps are buried.
If your attic needs cleaning or reinsulating anyway, ask us about attic cleaning and reconditioning. Air sealing is also one of the things PSE may offer rebates for.